Kayfun X – Svoëmesto

The German manufacturer Svoëmesto makes a come-back with the Kayfun X, an atomiser dedicated to MTL. Although just as well-built and accurate as its predecessor, it is much more practical to use. A great find for fans of high-end!

The Kayfun X RTA is therefore the culmination of 10 years of work and refinement. Some of their “recent” releases have included the Kayfun Prime, Kayfun 5, Kayfun Lite 2019, Kayfun 5 Squared and Kayfun Lite [plus].

MTL

Vaping with a Kayfun atomizer, means choosing an ultra-accurate vape that reveals finely detailed flavours. The vape is recognisable by the flavour rendering specific to the brand. With a diameter of 24 mm, the Kayfun X is a little larger than its big brother, the Kayfun Lite Plus. It is easier to use on a daily basis and is leak-free.

Features

Brushed stainless steel finish
AEROKON air flow control
Sealed 510 connector
Air adjustment directly under the coil from 0 – 1.8mm
Super-short design
316L SS construction
Easy to build deck
Top filling
PEEK insulators
PSU window
Small chamber size for the best possible flavour
Made in Germany
Serial number for authentication

Dimensions

Diameter: 24mm
Length: 42.5mm (not including 510 thread or tip)

Kit Contents:

Kayfun X with PSU window and matching steel drip tip
Full spares pack
User guide

The Kayfun X is composed of many parts which can be fully dismantled. The machining is exceptional. Everything fits together perfectly without forcing and with no play. Each element is designed to make the Kayfun X practical and reliable. Fully dismantling it only takes a few minutes. Ideal if you want to deep-clean the atomizer.

AEROKON AIRFLOW

The AEROKON Airflow Control is the first system for MTL tank atomizers that restricts the airflow directly under the coil rather than at the air inlet. This results in faster airflow and more even distribution around the coil. A better, denser and tastier vape! The Aerokon airflow system on the Kayfun X is the most accurate on the market today, offering airflow adjustment between 0 and 1.8mm.

The single-coil deck is screwed into a base. When you remove it, you can see the holes that let the air flow through into the deck. Here again, the seals are impeccable, as is all of the machining.

The airflow is not adjusted by inserts or holes on a ring that you turn. It is the 510 pin that acts as the airflow. The Aerokon system is simple but impressively efficient. This long screw with the stepped portions reduces the amount of air under the coil when it is screwed up. Conversely, unscrewing it allows more air in to cool the coil. The manufacturer states that the opening ranges from 0 to 1.8 mm in diameter. In actual fact, it is difficult to measure and ultimately is almost useless.

When the Kayfun X is ready to be used, you turn the screw until you get the restriction you want without having to measure the opening diameter. It’s all done by feeling and so much the better. The Kayfun X adapts to each vaper, and the vaper is no longer limited by a pre-defined opening diameter. It may appear a bit tedious to begin with, since you have to unscrew the atomizer from the box to adjust to the optimum setting. However, once you have found that sweet spot, in MTL you don’t change much, if ever.

As the Aerokon is screwed under the atomizer, its setting can’t get altered accidentally. The Kayfun X delivers a constant vape and always gets it right.

The deck is a classic Kayfun deck. Two posts opposite each other to position your coil just above the air inlet. Fitting the resistance coil is easy. Two small lugs hold the coil legs in their respective slots to avoid any slippage. During our tests, we opted for an Ni80 Fused with a diameter of 2.5 mm for a stabilised value of 0.72ohm. Placing the wick requires care, just like any MTL RTA.

When it comes to vaping, the result is awesome! The Kayfun X delivers the flavours of any e-liquid with almost surgical precision. The overall result is clean, fine and detailed. The flavour rendering is so stunning, you might even be surprised to rediscover some e-liquids. The atomizer doesn’t heat up and doesn’t leak. The 4 ml volume means you don’t have to fill up the Kayfun X too often. It’s a resounding success all the way for this high-end atomizer.

New filling system

With a brand new filling system, the Kayfun X has been developed to make your life easier.

Once the Kayfun X is mounted on your box or mod tube, simply pull the top of the atomizer. The base of the atomizer lifts up and closes the liquid flow from the inside. The ring at the top of the atomizer then unlocks the filling system. This process happens seamlessly without any further fiddling. You then only have to push on the letter X (located on the ring) to fill your Kayfun X. Just press down to close and you are ready to enjoy your Kayfun atomizer.

Do you use a Side by Side box? The filling system can be rotated (using the X marker) to the desired position. Note that the fill hole is extremely large and will fit most e-liquid bottle tips.

This is how fast and easy filling has become:

Pull up the top cap until you feel 2 clicks – the second click closes the liquid channels within the same movement
Press against the engraving to push the top cap aside and reveal the filling port
Fill up
Seal
Done