A Look At The SturdyONE by Sturdy Mfg

Scott Dananoah March 4, 2024
1 Comment

Boro RBA and dotAIO Compatible RTA

The SturdyONE by Sturdy Mfg is a convertible rebuildable base atomizer that is well built, simple to use, and high performance rebuildable atomizer that can be used in either Boro Tanks, or as a complete dotAIO tank replacement.

Out of the box, it comes fully configured as a dotAIO rebuildable tank, but with the swap of a few parts (included in kit), can be converted for use in a full sized Boro tank to use in Billet Boxes, delro, or any other device compatible with the standard sized Boro Tank.

Included, are different air flow pins to adjust your draw resistance as desired, along with spare silicone gaskets in both clear (shown installed in photos), or black to change according to your desired setup scheme.

Wire lead trap recess is machined into the deck to aid in building and allow for easier rebuilding.

Domed evaporation chamber cap results in smoother airflow movement for greater flavour yield.

STURDYONE SPECIFICATIONS:

  • Diameter : 20.0mm
  • Height : 34.8mm
  • Weight : 18.4g
  • 4.5mm diameter chimney
  • PCTG (Clear) dotAIO sized proprietary tank
  • SS316 (Food Grade) chimneys, cap, deck, base, Dot adapter
  • SS316 (Food Grade) slotted post screws
  • SS304 airflow pins
  • PEEK insulators
  • Black PEEK & Brass Boro adapter
  • Silicone & Nitrile o-rings/Fill plug
  • Dual platform friendly (dotAIO & Boro Tank)
  • Direct wicking system for constant and fast liquid flow
  • Reduced chamber cap with dome system for increased flavor production and airflow smoothing
  • Built-in 510 threading for easy coil building
  • Reverse threaded chimney to avoid Boro dumps
  • Spare kit provided in case you lose something
  • Support coils up to a maximum of 3.5mm in diameter
  • 1.0mm, 2.0mm, 2.5mm (installed), 3.0mm & 4.0mm airflow pins provided
  • Takes 4.15-4.20mls of juice in Dot mode (measured with water because juice has various viscosities)

DEVICE COMPATIBILITY

  • dotAIO V1
  • dotAIO V2 & V2 Lite
  • Other Boro Mods & Boro Tanks


WHAT’S IN THE BOX

  • 1x SturdyONE RBA
  • 1x 1.0 Airflow Pin
  • 1x 2.0 Airflow Pin
  • 1x 2.5 Airflow Pin (Pre-installed)
  • 1x 3.0 Airflow Pin
  • 1x 3.5 Airflow Pin
  • 1x Boro Sized Adaptor
  • 1x Spare Bag Kit

Estimated Price: $85.00 – $95.00

AVAILABLE AT

Categories: Member Articles
Advertise For Free
Scott Dananoah

Related Articles

Perseus V2

Perseus V2, RTA – RDA – SQUONK – Side air – Bottom air atomizer Perseus V2 RTA – RDTA -SQUONK is the new arrival of Perseus family that combines the Perseus V1 with its updated deck. We introduce you the Perseus V2, an atomizer with much more abilities than the V1 version.

Scott Dananoah July 22, 2021
4 Comments

Overview of the MOTI Play

The MOTI Play pod kit is a Mouth-To-Lung (MTL) and Restricted-Direct-To-Lung (RDL) pod device, powered by an internal 900mAh capacity battery with a variable power level of 5W to 30W. The different styles of vaping are achieved by the replaceable MOTI Play coils in the pod and the 360o adjustable airflow control dial on the bottom of the MOTI Play body.

Scott Dananoah January 5, 2023
0 Comments

Coil Wire Basics

A vape coil wire plays a very important role in your overall experience. It will form the coil, which works to build up the heat with the help of your battery and transmit them to your wick so it can be heated. Once your wick soaked with e-liquid is heated, then that lovely vapour will be produced. It’s not just central to your atomiser but how your vape will operate too.

Scott Dananoah June 6, 2022
0 Comments

Ohm’s Law

Ohm’s law is essential to vaping because it determines the amount of amperage and wattage that your build will output which in turn determines if your build resistance is within safe limits for your battery. When these limits aren’t understood or respected is when batteries can explode. You should also have a firm understanding of battery safety before attempting to build your own coil.

Scott Dananoah April 26, 2022
0 Comments

Taifun GX

The Taifun GX is a high quality RDTA designed and produced in Germany by SmokerStore. This tank features a bottom fed tank which utilises steel cables for wicks that bring the liquid to your cotton build in the top deck area. Building this atomiser is very simple and the coil/wick can be accessed quickly without any mess with a simple twist of the top cap.

Scott Dananoah May 29, 2022
0 Comments

Responses

  1. Tony Eden March 12, 2024

    This is definitely an outstanding RBA, build quality & performance is on point, it produces a nice, flavoursome & saturated vape every hit, would recommend to anyone!!! Awesome!!! 🤘🏼🔥👍🏼

Report

Harassment or bullying behavior
Contains mature or sensitive content
Contains misleading or false information
Contains abusive or derogatory content
Report Member as a Scammer
Contains spam, fake content or potential malware

Block Member?

Please confirm you want to block this member.

You will no longer be able to:

  • See blocked member's posts
  • Mention this member in posts
  • Invite this member to groups
  • Message this member
  • Add this member as a connection

Please note: This action will also remove this member from your connections and send a report to the site admin. Please allow a few minutes for this process to complete.

Report

You have already reported this .