Array White Gold by Hussar Vapes

Description

Dimensions:

• Length: 24,5 mm
• Width: 46 mm
• Height: 78 mm

Features:

• MM ClickFet V1 (Specs Below)
• Nano Series V2 510 Connector from Steelabs
• 8ml Gatling Bottle System from Moddog
• Gold Plated Connection Plates
• No Wires used for connections

Materials:

• Aluminum plates/panels
• Brass – gold plated elements to achive the best conductivity.
• Delrin SandBlasted Body and isolator

Warranty:

• We offer a lifetime warranty for Array.

MM ClickFet V1 Specification (ModMaker site):

ClickFet v1 is an un-regulated board for use with up to 4.2v battery configurations and designed to fit in the smallest space possible. It has a built in N-channel mosfet capable of up to 100A current, 2 x blue LED and an intelligent chip to provide the on / off feature, low voltage detection, timeout and short protection. ClickFet v1 also has reverse polarity protection to protect the board.

Specifications:

• Dimensions: With Switch: 15mm x 12mm / Without Switch: 11mm x 10.5mm,
• Mosfet: N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46V (typ),
• Operational voltage: 3.1 ± 0.1V – 4.20V,
• Low voltage protection: 3.1 ± 0.1V,
• Reverse polarity protection: Yes. Mod will auto fire but board will not burn out,
• Idle current: <10uA,
• Timeout Protection: Yes,
• Amp Limit: 46.67A (4.2v @ 0.09Ω).

Functions and LED Information:

• Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED’s flash 3 times and will not power the mosfet. This is also Short Protection,
• On/Off Function: When off, 5 clicks turns on and LED’s flash 5 times. When on, 5 clicks turns off and LED’s flash 5 times,
• Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet,
• Time Out Protection: If the mod is fired for 10 ± 1s the LED’s will flash 8 times and will stop powering the mosfet,
• Reverse Polarity Protection. If the battery is around the wrong way the mod will fire