Description
Array Blue Red by Hussar Vapes
Dimensions:
- Length: 24,5 mm
- Width: 46 mm
- Height: 78 mm
Features:
- MM ClickFet V1 (Specs Below)
- Nano Series V2 510 Connector from Steelabs
- 8ml Gatling Bottle System from Moddog
- Gold Plated Connection Plates
- No Wires used for connections
Materials:
- Aluminum plates/panels
- Brass – gold plated elements to achive the best conductivity.
- Delrin SandBlasted Body and isolator
Warranty:
Vapstor offers a lifetime warranty for Array.
MM ClickFet V1 Specification (ModMaker site):
ClickFet v1 is an un-regulated board for use with up to 4.2v battery configurations and designed to fit in the smallest space possible. It has a built in N-channel mosfet capable of up to 100A current, 2 x blue LED and an intelligent chip to provide the on / off feature, low voltage detection, timeout and short protection. ClickFet v1 also has reverse polarity protection to protect the board.
Specifications:
Dimensions: With Switch: 15mm x 12mm / Without Switch: 11mm x 10.5mm,
Mosfet: N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46V (typ),
Operational voltage: 3.1 ± 0.1V – 4.20V,
Low voltage protection: 3.1 ± 0.1V,
Reverse polarity protection: Yes. Mod will auto fire but board will not burn out,
Idle current: <10uA,
Timeout Protection: Yes,
Amp Limit: 46.67A (4.2v @ 0.09Ω).
Functions and LED Information:
- Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED’s flash 3 times and will not power the mosfet. This is also Short Protection,
- On/Off Function: When off, 5 clicks turns on and LED’s flash 5 times. When on, 5 clicks turns off and LED’s flash 5 times,
- Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet
- Time Out Protection: If the mod is fired for 10 ± 1s the LED’s will flash 8 times and will stop powering the mosfet
- Reverse Polarity Protection. If the battery is around the wrong way the mod will fire
Also Available:
- Array White Cyan
- Array White Gold
- Array Black
Reviews
There are no reviews yet.